Butt Hinges

This section contains the sizes and numbers of butts which are considered standard and are usually carried in stock. These are surface type blank hinges without holes and less finish. They have spun or loose pins of similar material.

Other gauges, widths, lengths, and pin materials can be made to order.

Prices based on quantity of order are available upon request.

NO MINIMUM quantity required,
any order acceptable.

Click on the following to go to the hinge material of your choice:
Steel (broad)
Steel (narrow)
Stainless Steel (plain)
Stainless Steel (narrow)
Aluminum (broad)
Aluminum (narrow)
Brass (broad)
Brass (narrow)
 



STEEL

Plain Surface Type (Broad)

Hinge leaf material -- Cold Rolled Steel
.187 -- .375 -- H.R.P.O.
Hinge pin material -- Steel


 
Number Gauge Width Open Length Pin Dia. No. of Joints
242416 .060 1-1/2 1-1/2 .125 3
323216 .060 2 2 .125 5
404016 .060 2-1/2 2-1/2 .125 5
323214 .075 2 2 .125 5
323214-2 .075 2 2 .187 5
404014 .075 2-1/2 2-1/2 .187 5
484814 .075 3 3 .187 5
484813 .090 3 3 .187 5
565613 .090 3-1/2 3-1/2 .187 5
404012 .105 2-1/2 2-1/2 .187 5
404011 .120 2-1/2 2-1/2 .250 5
484811 .120 3 3 .250 5
646411 .120 4 4 .250 5
565609 .150 3-1/2 3-1/2 .312 5
646408 .165 4 4 .312 5
646407 .187 4 4 .375 4
808007 .187 5 5 .375 5
969607 .187 6 6 .375 6
646425 .250 4 4 .625 3
808025 .250 5 5 .625 4
969625 .250 6 6 .625 4
969638 .375 6 6 .625 4
121238 .375 8 8 .625 4

Above usually supplied with spun pin as shown.
Rivet, loose pin, flush pin or other types may be had.
Also they may be modified by swaging, forming, hole piercing and other services.
Other gauges, widths, lengths and pin materials available to order.
NOTE: .250 and .375 gauge supplied with flush pin. Options available.



STEEL

Plain Surface Type (Narrow)

Hinge leaf material -- Cold Rolled Steel
.187 -- .375 -- H.R.P.O.
Hinge pin material -- Steel


 
Number Gauge Width Open Length Pin Dia. No. of Joints
243216 .060 1-1/2 2 .125 5
244016 .060 1-1/2 2-1/2 .125 5
324016 .060 2 2-1/2 .125 5
324014 .075 2 2-1/2 .187 5
324184 .075 2 3 .187 5
324183 .090 2 3 .187 5
404813 .090 2-1/2 3 .187 5
324011 .120 2 2-1/2 .250 5
404811 .120 2-1/2 3 .250 5
405611 .120 2-1/2 3-1/2 .250 5
485611 .120 3 3-1/2 .250 5
486411 .120 3 4 .250 5
566411 .120 3-1/2 4 .250 5
405609 .150 2-1/2 3-1/2 .312 5
485609 .150 3 3-1/2 .312 5
486408 .165 3 4 .312 5
566408 .165 3-1/2 4 .312 5
648007 .187 4 5 .375 5
489607 .187 3 6 .375 6
649607 .187 4 6 .375 6
809607 .187 5 6 .375 6
8012807 .187 5 8 .375 8
9612807 .187 6 8 .375 8
648006 .203 4 5 .500 5
809606 .203 5 6 .500 6
648025 .250 4 5 .625 4
809625 .250 5 6 .625 4
961238 .375 6 8 .625 4
961638 .375 6 10 .625 5

Above usually supplied with spun pin as shown. Rivet, loose pin, flush pin or other types may be had.
Also they may be modified by swaging, forming, hole piercing and other services.
Other gauges, widths, lengths and pin materials available to order.
NOTE: .250 and .375 gauge supplied with flush pin. Options available.



Stainless Steel

Plain Surface Type

Hinge leaf material -- Type 304-2B
Hinge leaf material -- Type 303/304 Cold Finish

Number Gauge Width Open Length Pin Dia. No. of Joints
S-242416 .060 1-1/2 1-1/2 .125 3
S-323216 .060 2 2 .125 5
S-404016 .060 2-1/2 2-1/2 .125 5
S-484816 .060 3 3 .125 5
S-646416 .060 4 4 .125 5
S-404014 .075 2-1/2 2-1/2 .187 5
S-414813 .090 3 3 .187 5
S-565613 .090 3-1/2 3-1/2 .187 5
S-404012 .105 2-1/2 2-1/2 .187 5
S-484811 .125 3 3 .250 5
S-646411 .125 4 4 .250 5
S-808007 .187 5 5 .375 5
S-969607 .187 6 6 .375 6
S-646425 .250 4 4 .625 3
S-808025 .250 5 5 .625 4
S-969625 .250 6 6 .625 4

Hinge leaf material -- Type 316-2B
Hinge pin material -- Type 316


 
Number Gauge Width Open Length Pin Dia. No. of Joints
SS-242416 .060 1-1/2 1-1/2 .125 3
SS-323216 .060 2 2 .125 5
SS-484813 .090 3 3 .187 5
SS-484811 .125 3 3 .250 5
SS-646411 .125 4 4 .250 5

Above usually supplied with spun pin as shown. Rivet, loose pin, flush pin or other types may be had.
Also they may be modified by swaging, forming, hole piercing and other services.
Other gauges, widths, lengths and pin materials available to order.
NOTE: .250 and .375 gauge supplied with flush pin. Options available.


Stainless Steel

Plain Surface Type (narrow)

Hinge leaf material -- Type 304--2B
Hinge pin material -- Type 303/304 Cold Finish


 
Number Gauge Width Open Length Pin Dia. No. of Joints
S-243216 .060 1-1/2 2 .125 5
S-324016 .060 2 2-1/2 .125 5
S-324816 .060 2 3 .125 5
S-404816 .060 2-1/2 3 .125 5
S-406416 .060 2-1/2 4 .125 5
S-486416 .060 3 4 .125 5
S-566416 .060 3-1/2 4 .125 5
S-324014 .075 2 2-1/2 .187 5
S-324813 .090 2 3 .187 5
S-404813 .090 2-1/2 3 .187 5
S-485613 .090 3 3-1/2 .187 5
S-324012 .105 2 2-1/2 .187 5
S-324811 .120 2 3 .250 5
S-404811 .120 2-1/2 3 .250 5
S-486411 .120 3 4 .250 5
S-566411 .120 3-1/2 4 .250 5

Hinge leaf material -- Type 316-2B
Hinge pin material -- Type 316


 
Number Gauge Width Open Length Pin Dia. No. of Joints
SS-243216 .060 1-1/2 2 .125 5
SS-324813 .090 2 3 .187 5
SS-404813 .090 2-/12 3 .187 5
SS-404811 .120 2-1/2 3 .250 5
SS-486411 .120 3 4 .250 5

Above usually supplied with spun pin
Rivet, loose pin, flush pin or other types may be had.
Also they may be modified by swaging, forming, hole piercing and other services.
Other gauges, widths, lenghts and pin materials available to order.



ALUMINUM

Plain Surface Type (broad)

Hinge leaf material -- No. 5052-H-34
Hinge leaf material -- No. 2017-T4


 
Number Gauge Width Open Length Pin Dia. No. of Joints
A-242414 .064 1-1/2 1-1/2 .125 3
A-323214 .064 2 2 .125 5
A-404014 .064 2-1/2 2-1/2 .125 5
A-484814 .064 3 3 .125 5
A-404012 .081 2-1/2 2-1/2 .187 5
A-484811 .091 3 3 .187 5
A-565611 .091 3-1/2 3-1/2 .187 5
A-404010 .102 2-1/2 2-1/2 .187 6
A-40408 .125 2-1/2 2-1/2 .250 5
A-48488 .125 3 3 .250 5
A-64648 .125 4 4 .250 5

Above usually supplied with spun pin
Rivet, loose pin, flush pin or other types may be had.
Also they may be modified by swaging, forming, hole piercing and other services.
Other gauges, widths, lengths and pin materials available to order.



ALUMINUM

Plain Surface Type (narrow)

Hinge leaf material -- No. 5052--H--34
HInge pin material -- No. 2017--T4

Number Gauge Width Open Length Pin Dia. No. of Joints
A-324016 .051 2 2-1/2 .125 5
A-162414 .064 1 1-1/2 .125 3
A-324014 .064 2 2-1/2 .125 5
A-324814 .064 2 3 .125 5
A-404814 .064 2-1/2 3 .125 5
A-324012 .081 2 2-1/2 .187 5
A-324811 .091 2 3 .187 5
A-404811 .091 2-1/2 3 .187 5
A-405611 .091 2-1/2 3-1/2 .187 5
A-485611 .091 3 3-1/2 .187 5
A-32408 .125 2 2-1/2 .250 5
A-32488 .125 2 3 .250 5
A-40488 .125 2-1/2 3 .250 5
A-48648 .125 3 4 .250 5
A-56648 .125 3-1/2 4 .250 5

Above usually supplied with spun pin
Rivet, loose pin, flush pin or other types may be had.
Also they may be modified by swaging, forming, hole piercing and other services.
Other gauges, widths, lenghts and pin materials available to order.



BRASS

Plain Surface Type (broad)

Hinge leaf material -- Half Hard Brass
Hinge pin material -- Free Cutting Brass SAE--72


 
Number Gauge Width Open Length Pin Dia. No. of Joints
B-404016 .051 2-1/2 2-1/2 .125 5
B-242414 .064 1-1/2 1-1/2 .125 3
B-323214 .064 2 2 .125 5
B-404014 .064 2-1/2 2-1/2 .125 5
B-484814 .064 3 3 .125 5
B-404012 .081 2-1/2 2-1/2 .187 5
B-484811 .091 3 3 .187 5
B-565611 .091 3-1/2 3-1/2 .187 5
B-404010 .102 2-1/2 2-1/2 .187 5
B-40408 .125 2-1/2 2-1/2 .250 5
B-48488 .125 3 3 .250 5
B-64648 .125 4 4 .250 5

Above usually supplied with spun pin
Rivet, loose pin, flush pin or other types may be had.
Also they may be modified by swaging, forming, hole piercing and other services.
Other gauges, widths, lenghts and pin materials available to order.



BRASS

Plain Surface Type (narrow)

Hinge leaf material -- Half Hard Brass
Hinge pin material -- Free Cutting Brass SAE--72


 
Number Gauge Width Open Length Pin Dia. No. of Joints
B-243214 .064 1-1/2 2 .125 5
B-324014 .064 2 2-1/2 .125 5
B-324814 .064 2 3 .125 5
B-404814 .064 2-1/2 3 .125 5
B-324012 .081 2 2-1/2 .187 5
B-324811 .091 2 3 .187 5
B-404811 .091 2-1/2 3 .187 5
B-405611 .091 2-1/2 3-1/2 .187 5
B-485611 .091 3 3-1/2 .187 5
B-324010 .102 2 2-1/2 .187 5
B-32408 .125 2 2-1/2 .250 5
B-32488 .125 2 3 .250 5
B-40488 .125 2-1/2 3 .250 5
B-48648 .125 3 4 .250 5
B-56648 .125 3-1/2 4 .250 5

Above usually supplied with spun pin
Rivet, loose pin, flush pin or other types may be had.
Also they may be modified by swaging, forming, hole piercing and other services.
Other gauges, widths, lengths and pin materials available to order.



Go to Home Page

Go to Loose Hinges Page

Go to Spring Hinges Page

Go to Continuous Hinges Page

Go to Order Form



Braun Manufacturing Co., Inc.
Established 1925
1350 Feehanville Drive
Mount Prospect, Illinois 60056
tel: (847) 635-2050
fax: (847) 635-7655
E-mail Braun sales@hinge1.com